Please click
items of interest to access the information:
T U R B I N E S , I N C .
PO Box 933
Highway 283 North
Altus, Oklahoma, 73522 USA
Phone: 1-800-809-1387
Fax:
1-580-477-3071
e-mail:
karen@turbinesincorporated.com
(c) 2005-2007Turbines, Inc. all rights reserved.
Webmaster: dezi@primaryflowsignal.com
LIQUID IN-LINE TURBINE FLOW METER
Turbines, Inc. manufactures a broad range of turbine flow meters, however, perhaps the most popular design through the years remains the In-Line design shown below.
For technical specifications of the Liquid In-Line Turbine Flow Meter please click this button:
The following table lists key information pertaining to the standard In-Line Turbine Flow Meter product line offered by Turbines, Inc. Special requirements are gladly handled upon request.
SERIES TM IN-LINE TURBINE FLOW METER FOR LIQUID SERVICE
| Turbines Part No: | Standard End Connection | Meter Line Size | Flow Range GPM | Flow Range LPM | Flow Range MPD | Flow Range BPD | Max
Pressure PSI |
|---|---|---|---|---|---|---|---|
| TM0038 | 1" X 1" Male NPT | 3/8" | 0.3 - 3.0 | 1.14 - 11.36 | 1.6 - 16 | 10 - 100 | 5,000 |
| TM0050 | 1" X 1" Male NPT | 1/2" | 0.75 - 7.50 | 2.84 - 28.39 | 4 - 40 | 25 - 250 | 5,000 |
| TM0075 | 1" X 1" Male NPT | 3/4" | 2.0- 15.0 | 7.57 - 56.78 | 11 - 80 | 68 - 514 | 5,000 |
| TM0078 | 1" X 1" Male NPT | 7/8" | 3.0 - 30.0 | 11.36 - 113.56 | 16 - 160 | 100 - 1,000 | 5,000 |
| TM0100 | 1" X 1" Male NPT | 1" | 5.0 - 50.0 | 18.93 - 189.27 | 27 - 270 | 170 - 1,700 | 5,000 |
| TM0150 | 1-1/2" X 1-1/2" Male NPT | 1-1/2" | 15.0 - 180.0 | 56.78 - 681.35 | 80 - 1,100 | 515 - 6,000 | 5,000 |
| TM0200L | 2" X 2" Male NPT | 1-1/2" | 15.0 - 180.0 | 56.78 - 681.35 | 80 - 1,100 | 515 - 6,000 | 5,000 |
| TM0200 | 2" X 2" Female NPT | 2" | 40.0 - 400.0 | 151.41 - 1,514.12 | 210 - 2,100 | 1,300 - 13,000 | 5,000 |
| TM0300 | 3" Victaulic end | 3" | 60 - 600 | 227.12 - 2,271.18 | 320 - 3,200 | 2,100 - 21,000 | 800 |
| TM0400 | 4" Victaulic end | 4" | 120 - 1,200 | 454.24 - 4542-36 | 654.12 - 6,541.18 | 4,100 - 41,000 | 800 |
| TM0600 | 6" Victaulic end | 6" | 200 - 2,000 | 757.06 - 7,570.61 | 1,090.20 - 10,901.98 | 6,800 - 86,000 | 800 |
| TM0800 | 8" Victaulic end | 8" | 350 - 3,500 | 1,324.85 - 13,248.57 | 1,907.84 - 19,078.47 | 12,000 - 120,000 | 800 |
| TM1000 | 10" Victaulic end | 10" | 500 - 5,000 | 1,892.65 - 18,926.53 | 2,725.43 - 27,254.96 | 17,143 - 171,423 | 800 |
PLEASE NOTE:
- The equipment referenced in the above tabulation is always in stock and ready for immediate shipment.
- Process end connections of all types including flanged per ANSI, AWWA, or other conventions, are available and quoted upon request.
- All Turbines, Inc. turbine flow meters have corresponding retrofit kits available from inventory, as required. Please see Retrofit Kits for Liquid In-line turbine meters.
- All specifications are accurate at the time of publication but may change at any time without prior notice. Please confirm performance specifications at the time of order to verify application requirements.
- All Turbines, Inc. turbine flow meters are subjected to a three point factory calibration to establish specific k-factor of the meter.
- K-factors of meters are not transferable.
(c) 2005 - 2005 Turbines, Inc. - all rights
reserved.
This page was last updated:
Tuesday, December 06, 2005