Please click items of interest to access the information: 

T U R B I N E S ,   I N C .
PO Box 933
Highway 283 North
Altus, Oklahoma, 73522  USA
Phone: 1-800-809-1387
Fax: 1-580-477-3071
e-mail: karen@turbinesincorporated.com

(c) 2005-2007Turbines, Inc. all rights reserved.

Webmaster: dezi@primaryflowsignal.com

LIQUID IN-LINE TURBINE RETRO FIT KITS

All turbine flow meters are subject to wear on the internal components, especially bearings, shafts and rotors, that lead to accelerating deterioration in accuracy, repeatability and performance, generally.  It is typical for turbine flow meters to be regularly calibrated for k-factor, depending upon the nature and importance of the particular flow metering installation.  This calibration can be accomplished either in the field, or by returning meters periodically to service companies, or the original manufacturer.

During this periodic proving, the internals of the meter can be examined and the need for replacement can be ascertained.

For this reason, Turbines, Inc. maintains a substantial inventory of "retro fit" kits in inventory.

Each kit is provided with the lab proven k-factor, and includes the rotor, rotor supports, shaft, bearings, and retaining rings.

Please find the following list of part numbers for retro fit kits corresponding to the turbine meter model numbers.

Turbines, Inc. retro fit kits also fit many other manufacturers' turbine meters.  Check with your friendly Turbines, Inc. application specialist for help in sizing.