Please click
items of interest to access the information:
T U R B I N E S , I N C .
PO Box 933
Highway 283 North
Altus, Oklahoma, 73522 USA
Phone: 1-800-809-1387
Fax:
1-580-477-3071
e-mail:
karen@turbinesinc.com
(c) 2005-2007Turbines, Inc. all rights reserved.
Webmaster: dezi@primaryflowsignal.com
CENTERING RINGS
In order to complete your flow metering system, accessories are available that will assist in making installation more efficient, or permit various configurations of the basic monitor/turbine flow meter arrangement to satisfy overall system requirements whether they be control, instrumentation, or otherwise.
If you have specific requirements that are not listed below, please contact one of our helpful applications specialists for assistance at 1-800-809-1387.
CENTERING RINGS
Centering rings are used when installing
Wafer Style turbine flow meters, specifically to facilitate placement of the
meter concentrically within the bolt hole pattern of the mating flanges of the
process piping. The centering rings are placed on the shafts of the flange
bolts thereby providing the appropriate spacing necessary. Centering rings
are offered in a range of line sizes and flange ratings and must be purchased
accordingly based on the specific application requirements. Turbines, Inc.
provides centering rings fabricated in HDPE (High density polyethylene) for
durability as well as price, although other materials are available based on
special request.
| Line Size (inches) | ANSI Rating | Model Number | O.D. (inches) | Bore size (inches) |
|---|---|---|---|---|
| 1 | 150 # | PFS-CR1-150 | 1.125 | 0.640 |
| 1 | 300 # | PFS-CR1-300 | 1.625 | 0.640 |
| 1 | 600 # | PFS-CR1-600 | 1.625 | 0.890 |
| 1 | 900 # | PFS-CR1-900 | 2.125 | 0.890 |
| 1 | 1500 # | PFS-CR1-1500 | 2.125 | 0.890 |
| 1 | 2500 # | PFS-CR1-2500 | 2.375 | 0.890 |
| 2 | 150 # | PFS-CR2-150 | 1.250 | 0.640 |
| 2 | 300 # | PFS-CR2-300 | 1.500 | 0.640 |
| 2 | 600 # | PFS-CR2-600 | 1.500 | 0.640 |
| 2 | 900 # | PFS-CR2-900 | 3.000 | 0.890 |
| 2 | 1500 # | PFS-CR2-1500 | 3.000 | 0.890 |
| 2 | 2500 # | PFS-CR2-2500 | 3.250 | 1.015 |
| 3 | 150 # | PFS-CR3-150 | 1.125 | 0.640 |
| 3 | 300 # | PFS-CR3-300 | 1.750 | 0.766 |
| 3 | 600 # | PFS-CR3-600 | 1.750 | 0.766 |
| 3 | 900 # | PFS-CR3-900 | 2.625 | 0.890 |
| 3 | 1500 # | PFS-CR3-1500 | 3.125 | 0.890 |
| 3 | 2500 # | PFS-CR1-2500 | 4.375 | 1.265 |
| 4 | 150 # | PFS-CR4-150 | 1.437 | 0.640 |
| 4 | 300 # | PFS-CR4-300 | 1.812 | 0.766 |
| 4 | 600 # | PFS-CR4-600 | 2.437 | 0.890 |
| 4 | 900 # | PFS-CR4-900 | 3.187 | 1.140 |
| 4 | 1500 # | PFS-CR4-1500 | 3.437 | 1.265 |
| 4 | 2500 # | PFS-CR4-2500 | 4.687 | 1.516 |
For centering ring drawings please click here:
(c) 2001 - Turbines, Inc. - all rights
reserved.
This page was last updated:
Tuesday, December 06, 2005