Please click items of interest to access the information: 









 

T U R B I N E S ,   I N C .
PO Box 933
Highway 283 North
Altus, Oklahoma, 73522  USA
Phone: 1-800-809-1387
Fax: 1-580-477-3071
e-mail: karen@turbinesincorporated.com

(c) 2005-2007Turbines, Inc. all rights reserved.

Webmaster: dezi@primaryflowsignal.com

 

 

 

ELECTRONIC ACCESSORIES AND OPTIONS

Turbines, Inc. maintains a substantial inventory of accessory and optional parts that are designed to expand the capabilities of our product line, or address the unique requirements that may occur in field applications.  The following provides many of the standard items, however, should special requirements arise that are not covered below, please contact Turbines, Inc. for special assistance. 

 

SERIES FM TURBINES, INC. "WORKHORSE FLOW MONITOR ACCESSORIES

Turbines Part No: Description
TA0001

REMOTE CABLE ASSEMBLY-10 foot cable assembly with straight connector. 
TA0002

REMOTE CABLE ASSEMBLY-10 foot cable assembly with 90 degree connector. 
TA0003

ADDITIONAL CABLE-additional cable  for remote mounting, available per foot. 
TA0004

STANDARD MAGNETIC PICK-UP-Magnetic pick-up for standard service (-100 degrees F to +300 degrees F.)
TA0005

BATTERY-Lithium 3.6V battery( 2 Required per monitor.)
TA0006

HIGH TEMP MAGNETIC PICK-UP-Magnetic pick-up for high temperature service (-100 degrees F to +450 degrees F.)
TA0007

HIGH TEMP CABLE ASSEMBLY-10 foot cable assembly with straight connector for high temperature service (-100 degrees F to +450 degrees F.)
TA0008

ADDITIONAL HIGH TEMP. CABLE-additional cable for high temperature remote mounting, available per foot (-100 degrees F to +450 degrees F.)
TA0009

4 - 20mA OUTPUT FEATURE-this option allows 4 - 20mA output from the FM0208.  Device is provided in separate enclosure and requires independent 12 - 24 VDC power external supply.
TA0010

0 - 5 / 0 - 10 VOLT OUTPUT FEATURE-this option provides 0 - 5 / 0 - 10 volt output from the FM0208.  Device is provided in separate enclosure and requires independent 12 - 24 VDC power external supply.
TA0011

PREAMPLIFIER-this option amplifies signal from magnetic pick-up to FM0208 flow monitor in the case of long wiring runs that may cause signal deterioration.  Device is provided in separate enclosure and requires independent 12 - 24 VDC power external supply.